X-DA1500
X-DA1500 HIGH EFFICIENCY POWERAMPLIFIER 1×500W
• One channel 500W high efficiency Class-D amplifier
• Effective ventilation using forced air cooling fan
• Automatic protection
• Fault detection
• CE compliant
X-DA1500 high efficiency power amplifier provides audio signal amplification for the X-618 Digital Public Address and Voice Alarm System. X-DA1500 is reliable, efficient and light in weight.
FEATURES
INPUT/OUTPUT
• X-DA1500 supports both balanced and unbalanced audio inputs. To receive unbalanced audio inputs, simply connect the ground port with the negative input port to the rear panel.
• X-DA1500 can receive audio signal from X-DCS2000/EN via Ethernet through the RJ45 standard port.
FAULT DETECTION
• X-DA1500 can self-protect from overheat, overcurrent, overvoltage and undervoltage. For example, when the internal temperature reaches its critical limit, the overheat protection circuit will shut down the power amplification module and activate the protection indicator light on the front panel.
• X-DA1500 can detect power supply errors automatically during operation. The built-in fuse will provide overcurrent protection to the main power supply.
• When a shout circuit is detected in the main power circuit, the power will be automatically shut down. The backup power will then be enabled to replace the main one.
• When a fault or self-protection or self-testing happens, its audio input port will short circuit and a fault signal will be sent to the control unit in the network.
SAFETY
• The device adopts a lightweight design. The front panel is made of UL94V-0 fire proof ABS material, protecting the machine under extreme conditions.
• A cooling fan is equipped for heat exhaustion so that the machine can maintain high working efficiency.
VOLUME CONTROL
• When HN-D32N Noise Detector is installed, X-DA1500 can adjust volume according to the ambient noise automatically to ensure high sound intelligibility.
INDICATOR LIGHTS
• Power light
• AC fault light x 2
• Signal light (for each channel)
• Clip light (for each channel)
• Protection light (for each channel)
INTERFACES
• Main power and backup power port
• Audio inputs (balanced or unbalanced)
• Audio outputs (100V or 70V)
• RJ-45 net cable port
The HN-A500I provides a reliable and efficient means of amplifying audio signals for PAVA systems. This makes it a must-have for public places, especially during emergencies. It supports both balanced and unbalanced audio inputs as well as 100V/70V speaker outputs. To increase output power, the HN-
ตู้ไฟอลาม Honeywell Morley 2, 4, 6 และ 8 โซน ไฮบริดแสดงผลได้สูงสุดถึง 256 ตำแหน่ง จอแสดงผลแบบ LCD รายงานการแจ้งเตือนได้ทุกตำแหน่ง ง่ายต่อการใช้งานและบำรุงรักษา
Featuring a server-side system resource platform and a client-side management system, the X-SMART System Management Software can perform centralised management of related devices through an Ethernet network.
The X-NPMI Configurable Network Paging Console is a key module in Honeywell’s X-618 Digital PAVA System. It provides paging, monitoring, full duplex communication, touch screen operation and other user-friendly configurable functions. Its innovative, 4.3” colour LCD touch screen enables direct opera
The HMC-K8 increases the number of physical keys on the RK-MIC to help improve the efficiency of manual operations. It has 8 keys which can be configured as zone selection, group selection, broadcast task selection, volume control or zone close. Its 8 indicator LEDs display different information bas
The Local Control panel is the interface between field devices such as loudspeakers and local audio sources. EVACPRO-G2 is a cost effective solution for requirements less than 16 loudspeaker circuits(zones). The unit has 16 emergency inputs (15 Zone wise & 1 for all zones) and 16 loudspeaker circuit
Expand your PAVA reach to 8 speaker zones with the HEX-8 Expander from Honeywell. It supports two audio channels simultaneously and provides independent audio control for each channel. Eight monitored contact inputs can be linked with a fire alarm system to trigger alert and evacuation messages in c
With 4 independent amplifier channels (100 V), the 4XD125B is compatible with the Variodyn D1 system and controlled by its DOM4-8 or DOM4-24. The NF inputs and control inputs are connected to the DOM with the input cable, while the outputs are connected with the output cable.