X-NPMI-D
X-NPMI Configurable Network Paging Console
• 4.3-inch color LCD touch screen
• Intuitive and simple user interface
• Detachable gooseneck microphone
• Built-in monitor loudspeaker
• Digital audio processing
• Flush mount desktop installation available
X-NPMI Configurable Network Paging Console is a key module in X-618 Digital Public Address and Voice Alarm System. It provides paging, monitoring, full duplex communication, touch screen operation and other configurable functions.
FEATURES
CONNECTIONS
• X-618 system can connect with up to 20 X-NPMI via Ethernet. X-NPMI can be used as a node anywhere in the network. To reduce wiring cost, the devices can be connected into an existing network provided that there is sufficient bandwidth to reduce wiring cost.
AUDIO TRANSMISSION
• The device comes with a detachable gooseneck microphone. Users can change different types of microphone for different real-time broadcasting requirements. The received audio signal will be digitalized to eliminate sound distortion during transmission.
• The built-in speaker not only can be used for zone monitoring but also full-duplex intercom with other X-NPMI in the network.
• X-NPMI supports fail-safe operation. Even when the connected X-DCS2000/EN fails, X-NPMI is still able to communicate with other X-NPMI and broadcast through other X-DCS2000/EN in the network.
TOUCH SCREEN
• Users can operate directly on the innovative 4.3-inch color LCD touch screen without adding an extra key module unit. With the touch screen, users can supervise the system status, select broadcast zones, assign zone groups or other broadcast controls, including setting playlists, timing road castings etc. With the built-in configuration software, zones broadcast status or button functions can be configured easily.
SHORT-CUT OPERATION
• X-NPMI has three short-cut buttons on the operation panel: microphone switch, all-zone emergency broadcast button can switch the system to emergency broadcast mode, where recorded evacuation message will be played and fire alarm will be activated without delay.
Reliable, efficient and lightweight, the HAM-2000 power amplifier provides 70V/100V audio signal amplification for the Intevio PAVA system.
Compatible with the Variodyn D1 PAVA system, the 2XD400 power amplifier is controlled by its DOM4-8 or DOM4-24 Digital Output Module. Both LF inputs and control input are connected to the DOM via a cable. A mains cable is provided with the system.
Lightweight yet stylish, unobtrusive yet powerful, the L-PJP20A is great for a number of PA & VA applications. It is easy to install, fire-proof and cost-effective.
The L-PCP20A offers reliable operations over a longer operating life, thanks to its robust ABS grille. Its coaxial design provides wider frequency range than many other speakers. Easy to connect and install, the L-PCP20A is a great choice for many PA applications.
This best-of-breed mixer amplifier comes with 3-level priority with mute function, 7-band graphic equaliser and 5-zone remote paging microphone. It can be extended by adding an audio mixer and power amplifier with LINK and PRE-AMP. Its advanced protection system offers 3-way protection: current limi
The HEX-24 adds 24 speaker zones and 24 monitored contact inputs to the Intevio system. It can connect with up to 6 external power amplifiers and 1 backup amplifier.
X-NRI/EN-D Network Resource Interface is a universal interface of X-618 for external control access and audio extension. It is suitable to the needs of central interfaces management required by middle-to-large applications. The device provides 4 external audio source interfaces and 1 built-in audio
The X-DA1500 is a 500W Class-D amplifier specifically designed for the X-618 PAVA system. This innovatively-designed product can automatically detect power supply errors during operation, and protect itself from overheating, over-currents, overvoltage and even under-voltage. Featuring a lightweight